ISO 9001, 14001 and 45001 certified. LGP and SSROC approved contractor.

info@tandlasphalting.com.au (02) 9064 8045
Get a free quote
Freshly repaired section of asphalt on a sealed driveway

Home and property

Driveway repairs and resurfacing

A cracked or sunken driveway doesn’t always need replacing. We work out what’s causing the damage and fix that, whether it’s one section or the whole surface.

Send a few photos and we’ll tell you if it’s a repair or something larger.

Google rating 5.0 out of 5 ISO 9001 quality management system certified ISO 14001 environmental management system certified ISO 45001 occupational health and safety management system certified JAS-ANZ accredited Local Government Procurement approved contractor SSROC panel contractor

What’s wrong with your driveway?

What you can see on top usually tells us what’s happening underneath.

Cracks

Cracks let water into the base. Fine cracks can be sealed. Wide or spreading cracks can mean the base is moving.

Usual fix: crack sealing or a section repair

Potholes

A pothole means the asphalt and the base under it have broken down. Filling the hole from the top won’t last.

Usual fix: dig out, rebuild the base, new asphalt

Sunken sections

A low spot usually means the base has moved or gone soft. We find the cause before we touch the surface.

Usual fix: rebuild that section

Worn or faded surface

If the driveway still feels firm, the base is often fine and only the top layer needs renewing.

Usual fix: resurfacing

Broken edges

Edges crumble where they aren’t supported or get driven over. They can be rebuilt with proper edge support.

Usual fix: edge rebuild

Pooling water

Water that sits on the driveway softens the base. The drainage has to be fixed as part of the repair.

Usual fix: regrade or drain, then repair

Repair, resurface or rebuild?

We check the base first, then recommend the smallest job that will last.

Get a free assessment

Repair

Smallest job

Fix the damaged sections

For isolated cracks, potholes, broken edges or a single sunken patch, where the rest of the driveway is sound.

Resurface

Medium job

New asphalt over a sound base

When the base is solid but the surface is worn, cracked or patched. We fix any weak spots, then lay a new layer over the top.

Rebuild

Biggest job

Rebuild the base, then the surface

When the base has failed across a large area or water is getting underneath. New asphalt over a failed base won’t last.

T&L crew laying new asphalt along a residential street in North Rocks Fresh asphalt coming out behind the paver Steel drum roller compacting new asphalt T&L asphalt paver on site

Laying the new surface, North Rocks

Resurfacing an older driveway

If the driveway is structurally sound, we prepare the existing surface and lay a new layer of asphalt over it. It costs less than a full rebuild and you end up with a new surface.

Resurfacing deals with

  • Worn, faded or rough asphalt
  • Fine cracking across the surface
  • Old patches and uneven colour
  • Loose stones on the surface

We check the base before we quote. If there’s a problem underneath, we’ll tell you first.

Only need a protective coat? See driveway sealing

How a repair job runs

Photos from T&L jobs.

  1. Pothole in a failed asphalt surface 1

    We find the failed area

    We mark out the damage and check how deep it goes.

  2. Paver placing stabilised base material 2

    We rebuild the base

    Failed material comes out and a compacted base goes back in.

  3. T&L crew preparing a section for new asphalt 3

    We prepare the surface

    Edges are cut clean and a tack coat goes down so the new asphalt bonds.

  4. Finished asphalt driveway in Cranebrook 4

    We lay and compact

    New asphalt is laid, rolled and finished level with the surface around it.

A road crew, on your driveway

We repair council roads and car parks under the LGP and SSROC panels, and we’re ISO certified for quality, environment and safety. Your driveway gets the same preparation and equipment.

ISO 9001 ISO 14001 ISO 45001 LGP approved and SSROC panel contractor

Houses

From one failed patch to a full resurface.

Rural and acreage

Long driveways and access roads with potholes and broken edges.

Strata and shared driveways

Common property and shared access, planned around residents.

Commercial entries and car parks

Entrances, access roads and parking areas.

Driveway repair questions

Can’t see your question? Call (02) 9064 8045.

Often, yes. If the damage is limited to a few areas and the rest of the driveway is sound, we repair those sections and leave the rest.

★★★★★

Luke and Tommy and their team remodeled and resurfaced our driveway, adjusting the levels to fit in with a new patio. It was a tricky site with poor access and a steep slope. I am very impressed with all aspects their work. They provided a prompt assessment and quote, fair price, and then commenced the work without delay. Luke's communication with us was excellent, and the final result is great. This is a genuine family company run by very decent and skilled people. Highly recommended. Mark McLean in Beecroft.

Mark McLean, Beecroft, Google review
Google rating 5.0 out of 5 Read our Google reviews

Get a free driveway assessment

Three quick steps. Photos of the damage help us tell you what it needs.

  • Free site inspection and quote
  • We call back to book a time
  • Clear pricing, no obligation

    1. 1. The job

    2. 2. Where and size

    3. 3. Your details

    What do you need?

    This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

    Prefer to talk? (02) 9064 8045 Email us info@tandlasphalting.com.au
    Call Get a quote